Jata JCTC2101 Instrucciones De Uso página 12

• Always place the heater in vertical position and stand it on a
firm solid horizontal base (not over carpets specially quilted
carpets).
• Do not fix the tip over switch. It is dangerous that the switch get
fixed, because in case of the appliance falling it would not do
its function.
• Do not rest the cable on hot parts of the appliance and avoid to
place it in the air output grid.
• This appliance incorporates a safety device which will
disconnect the resistance in case of overheating.
• The cleaning and maintenance done by users, can not be done
by children without any supervision.
• If the power cord is damaged, it must be replaced by the
manufacturer or by its after-sales service or similar qualified
personnel in order to avoid any danger.
INSTRUCTIONS OF USE
• Plug the appliance into the mains, the light indicator (2) will be kept on while switch it is connected.
• Turn the thermostat knob (3) clock-wise to the maximum position (MAX).
• Turn the power selector (1) to the desired position. The fan heater will start to work.
- Position :The appliance will work as a fan and only give cold air.
- Position :Minimum power.
- Position :Maximum power.
- Position :Off.
- Position :The appliance will work as a fan and only give cold air with oscillating movement.
- Position :Minimum heating power with oscillating movement.
- Position :Maximum heating power with oscillating movement.
• When the room reaches the desired temperature, turn the thermostat knob (3) anti-clock-wise until an
acoustic signal is heard, the operation of the fan heater will go off. The thermostat will automatically maintain
the selected temperature.
12