Publicidad
Idiomas disponibles
Idiomas disponibles
• MANUAL – COMFORT MODE:
a) Press the Comfort Mode button (Figure 13).
b) Use the (-) or (+) buttons to select the desired temperature. (Example, select 22。C)
c) The selected temperature is recorded. The existing room temperature is displayed again after a few seconds.
Note: Comfort mode is recommended to obtain a pleasant temperature when staying in the room.
Recommended temperature: 21°C.
• MANUAL – ECONOMY MODE:
a) Press the Economy Mode button (Figure 13).
b) Use the (-) or (+) buttons to select the desired temperature. (Example, Select 18。C)
c) The selected temperature is saved.
seconds.
Note: This mode is recommended for long absences from the room and is the ideal temperature for night-time.
Recommended temperature: 17。C.
• MANUAL – ANTI-FREEZE MODE:
a) Press the Antifreeze Mode button (Figure 13).
b) Use the (-) or (+) buttons to select the desired temperature. (Example, Select 7。C)
c) The selected temperature is saved.
The existing room temperature is displayed again after a few seconds .
Note: This mode is recommended for homes not used in extremely cold climates.
Recommended temperature: 5。C.
IMPORTANT: If the selected temperature is higher than the room temperature, the heater switches on.
( the flame symbol is displayed
Note: If no button is pressed after about ten seconds, the screen will turn off in power-saving mode. It lights up
again when you press a button.
Switching off
The heating operation can be interrupted by pressing the "Standby" button (Fig. 13). The heater can be switched
off permanently using the ON/OFF switch at the bottom right of the appliance.
)
The existing room temperature will be displayed again after a few
)
Publicidad
