Publicidad
3. Dismantle the middle hinge, the screws, the screws hole caps and remove the
freezer door.
EN
4. Dismantle the bottom hinge, hole caps and screws, Install the bottom hinge
shaft and adjust foot on other sideof the bottom hinge, then install the hinge
on the other side.
5. Dismantle the screw, sleeve pipe and stopper from the refrigerating door and
freezer door, and the support on the lower cover of the refrigerating door is
also removed. Then install them on the other side of the doors in order. (Take
out the bottom stopper from accessories package)
6. Exchange the position of sleeve pipe and hole cap at the top cover of
refrigerating door, and install the upper hinge sleeve on the freezer door to the
hole on the other side of axis sleeve.
screw
middle hinge
shaft
screw
hole cap
07
screw
hole cap
shaft
screw cap
Publicidad
