Publicidad
Idiomas disponibles
Idiomas disponibles
EN
This manual contains important information that should be kept
for future reference.
Self-assembly.
Warning! Keep children out of the mounting area. Leave the plastic
bags out of reach. Small parts are a choking hazard.
Materials
2 seat sofa and armchairs
Cover: 100% Olefin (100% polypropylene).
Padding of back cushions: polyurethane foam 18 kg/m
Padding of seat cushions: polyurethane foam 20 kg/m
Structure and feet: aluminum powder coated.
Low table
Top and feet: aluminum powder coated.
Assembly instruction
Before beginning assembly, identify all components using the
manual.
In order not to lose components, do not throw the package before
completing the full assembly.
This product must be assembled by an adult.
Assemble on a clean, flat surface.
Recommendations for use
This product was designed for outdoor use.
Do not leave stagnant water on the product.
Do not stand on the products.
Do not sit on the table.
Do not sit on the armrests.
Beware of sharp objects.
This outdoor furniture is designed for use under normal weather
conditions.
Maintenance
Clean with a soft, damp cloth. Then wipe with a clean, dry cloth.
Do not use abrasive products.
Continuous exposure to climatic elements and extreme weather
may accelerate the aging of the product.
Do not leave permanent stagnant water on the product, this would
cause the product to deteriorate.
Use a cover to preserve your outdoor furniture. To avoid
condensation, the cover must allow the air to circulate.
Protect from frost and bad weather.
Bring back indoor your furniture during cold weather to extend its
life.
Store the product in a clean and dry place.
Cushions
Vacuum or brush the cloth once a week. Dust accumulation accele-
rates wear and the colors from fading.
Spills should be removed immediately with a clean and dry dab-
bing to absorb the liquid. Do not rub, it may damage the fabric.
Variations in color between the surfaces cleaned and uncleaned
might appear.
Do not place the product near a heat source (radiator, fireplace...)
nor a moisture source. The heat and humidity can damage the
product.
Do not use abrasives.
Return and tap regularly the cushions so they do not wear out and
do not get dirty unevenly.
To clean the covers and cushions, please follow the maintenance
conditions mentioned on the label sewn inside each cover.
Pepite - 11/2022
BC
If you have any comments or suggestions regarding this
product, assembly instructions or service received, please
enquire at your nearest store or contact us on our website at:
www.habitat-design.com or write to this address: HABITAT, 70
AVENUE VICTOR HUGO, 93300 AUBERVILLIERS FRANCE.
.
3
.
3
The packaging elements are to be sorted out according to local
requirements. Make the right sorting choice and give them a
second life!
By sorting out this manual you contribute in preserving
the environment. This manual can still be found on
www.habitat-design.com.
1
Keep the label with lot number, it may be useful in case
of complaint.
Publicidad
