Levenhuk Ermenrich Seek TV50 Guia Del Usuario página 4

•
Units of measurement. Press the OK/Menu button (4) to enter the menu. Press the Up button (2) and Down button (3) to choose
between °C/°F/K. Press OK/Menu button (4) to confirm.
•
Emissivity correction. Press the OK/Menu button (4) to enter the menu. Press the Up button (2) and Down button (3) to adjust the value
(from 0.01 to 1.00). Press the OK/Menu button (4) to confirm.
•
Language / Date & time / Alarm / Auto-off. Press OK/Menu button (4) to enter the menu, then select More Settings. Press the Up
button (2) or Down button (3) button to choose/adjust the settings. Press the OK/Menu button (4) to confirm.
•
Image fusion. To accurately align the thermal image and the visible image, choose the dual fusion mode, then aim the device at the
target. Press the OK/Menu button (4) to enter the menu, select More Settings, then select Image fusion. Press the Up button (2) and the
Down button (3) to adjust the alignment. Press Power/Back button (1) to confirm.
!
IR illumination (infrared radiation) can be detected by photo and video cameras as well as other similar electronic devices during
operation.
Specifications
IR resolution
Spectral range
Field of view (horizontal)
IR temperature range
Display resolution
Auto-off
Storage
Operating temperature range
Power supply
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.
Care and maintenance
Use the device only as specified in the user manual. Do not use the device to detect live power lines (such as 220V power supply lines) as
it will damage the device. In order to avoid lightning strikes, do not use the device during thunderstorms. Keep away from children. Do not
try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local specialized service
center. Protect the device from sudden impact and excessive mechanical force. Do not use the product in explosive environment, close to
flammable materials. Store the device in a dry cool place. Only use accessories and spare parts for this device that comply with the technical
specifications. Never attempt to operate a damaged device or a device with damaged electrical parts! If a part of the device or battery is
swallowed, seek medical attention immediately.
Battery safety instructions
Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one
time; taking care not to mix old and new ones or batteries of different types. Clean the battery contacts and also those of the device prior to
battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and –). Remove batteries from equipment that
is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high
temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Remember to switch off
devices after use. Keep batteries out of the reach of children, to avoid the risk of ingestion, suffocation, or poisoning. Utilize used batteries
as prescribed by your country's laws.
Levenhuk International Warranty
Levenhuk products, except for their accessories, carry a 5-year warranty against defects in materials and workmanship. All Levenhuk
accessories are warranted to be free of defects in materials and workmanship for six months from the purchase date. The warranty entitles
you to the free repair or replacement of the Levenhuk product in any country where a Levenhuk office is located if all the warranty conditions
are met.
For further details, please visit: levenhuk.com/warranty
If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.
32x32px
8–14µm
33°
–20...+400°C (–4...204°F)
320x240px
15min, 30min, 1hour
16GB microSD card
–10...+45°C (+14...113°F)
2600mAh 3.7V lithium battery; USB cable for charging
4