Bosch Professional GLI 18V-800 Manual Original página 19

A significantly reduced operating time after charging indicates that the battery has de-
teriorated and must be replaced.
Follow the instructions on correct disposal.
Operation
Starting Operation
Setting up
Place the cordless worklight on a stable, level surface. Make sure it is secure.
Switching on/off and adjusting the brightness
On/off button (1)
Press 1×
Press 2×
Press 3×
Press 4×
If the cordless worklight has been switched on in dimmed mode for approx. five minutes,
it will be switched off immediately the next time the button is pressed.
If you fold up the cordless worklight with the illuminated area in the direction of the bat-
tery holder (4), the cordless worklight will switch off automatically.
Note: This function may be impaired by magnetic fields.
Temperature Dependent Overload Protection
If the permissible operating temperature is exceeded, the cordless worklight switches
off. Let the cordless worklight cool down and then switch the cordless worklight back on.
Practical Advice
Shortly before the cordless worklight switches off because of an empty battery, it will
flash three times and shine with reduced brightness.
Turning/Tilting the Lamp Head
You can turn the lamp head (2) by 360° in 21 settings and tilt it by up to 180° in seven
settings.
Utility hook
You can use the utility hook (3) to hang up the cordless worklight.
Do not use the utility hook to pull objects. The utility hook or cordless worklight
u
could break.
Bosch Power Tools
Function
Switches on the cordless worklight, low brightness
Switches on the cordless worklight, medium brightness
Switches on the cordless worklight, full brightness
Switches off the cordless worklight
English | 19
1 609 92A 8J8 | (08.05.2023)