Publicidad
INSTALLING VERTICAL GRAPHIC CARD
显卡垂直安装说明 , 顯卡垂直安裝說明
The screw pitch on the PSU shroud is 125mm, please check your PCI-E riser cable, and install
the stand-off for the VGA riser cable at the corresponding position.
电源仓盖板的锁孔间距为125mm，请依照您的PCI-E转接线孔距，将垂直显卡排线铜柱锁固在对应位置。
電源倉蓋板的鎖孔間距為125mm，請依照您的PCI-E轉接線孔距，將垂直顯卡排線銅柱鎖固在對應位置。
20
Power supply screws & Graphic card screws
7
电源螺丝 & 显卡螺丝 , 電源螺絲 & 顯卡螺絲
Stand-off for VGA riser cable
3
垂直显卡排线铜柱
垂直顯卡排線銅柱
The vertical graphic card and the PCI-E riser cable are not included in the package,
please purchase separately.
显卡和 PCI-E 转接线不包含在包装内，请单独购买。
顯卡和 PCI-E 轉接線不包含在包裝內，請單獨購買。
7
3
21
Publicidad
