Klarstein PURELINE Manual Del Usuario página 21

blue Ω type clip
plastic ring
port
Pull it softly to
make a gap
To disconnect
Take down the Ω type clip. Make the plastic ring attaching to the port. Pull out the
PE pipe.
Installed connector
Press the plastic ring
CARTRIDGE INSTALLATION
1. Take out the cartridge from the carton. Remove
the outer plastic packing
2. Put the cartridge into the hole of machine. Spin
clockwise to connect with waterway board.
3. Install the cartridge into the machine according to
the picture.
Take down Ω
type clip
Put the clip
into the gap
Remove Ω clip.
Pull out the PE pipe.
.
Insert the PE
pipe
RO membrane
PCT filter
EN
21