Audizio 102.450 Manual De Instrucciones página 14

You will see the icon appeared on the display if the timer is set.
Here you will find the complete settings / options available to configure your own radio. On the Home menu, navigate to
Configuration setting. Press OK and you will see a list of options available.
Network
•
Wireless Network
o Add wireless network
Scan & select - It will scan out a list of wireless networks around.
WPS button - Choose this option to connect your Wi-Fi router via WPS if the router has a WPS button.
o Remove wireless network
If you have already set up a network and want to remove it, choose this option.
Note: Always bring the tuner within 2 meters of the Wi-Fi router for setup.
o AP:[]
If you have added more than one network and want to switch to another one, select this option to change.
o Signal
Shows the strength of the wireless signal of the router as received by the tuner. Usually signal levels lower than -
70dBm is at weaker level and if reception is affected, you may need to optimize the router location and/or check
for any problems of the router itself.
o IP
The IP is set to Dynamic by default. Select Fixed IP according to your network condition.
o DNS
The DNS is set Dynamic by default. Select to change <Fixed> DNS according to your network condition.
•
Network Options
Always on: The WLAN function remains switched on (faster access when switching from other modes of radio).
Auto off in 15/30s: The WLAN function shuts down after 15/30 seconds when not in use to save energy.
•
Wi-Fi Channels
Not all of the Wi-Fi channels are available in every country. There may be variation between different countries.
Therefore it is necessary to choose the Wi-Fi channels to ensure the Wi-Fi performs satisfactory.
We have already set the channels according to the requirement in different countries. Choose the country you are
staying from the list to get the correct channel.
•
Network connection test
In case there are any issues in connecting to Skytune, select this option to check out any failed items of the network
parameters for further diagnosis.
Date and Time
The radio will set your local time automatically after the internet connection is completed.
If you want to do manual setting, change it by the following options:
•
Time zone
Auto-set Time Zone: This option is set by default.
Manual-set Time Zone: Choose this option if you want to set the time in another region.
Choose and highlight the region/city you prefer and press OK to confirm.
Coupled with NTP (use network time) and DST (Daylight time saving) will be adjusted automatically if you choose to
use network time (NTP).
•
Set Time Format
Choose either 12-hour or 24-hour notation you prefer.
•
Clock style
You can choose a digital- or analog style clock graphic. The selected style will apply in standby as well as the big
clock display in radio playback.
•
Set Date Format
•
DST (Day Light Saving)
Enable on/off
•
NTP (Use network time)
NTP is designed to synchronize a device's clock with a time server. Your radio will synchronize the time server by
default every time it powers up and connects to Internet.
This ensures a very high degree of accuracy in the radio's clock. You can change to use other time server by inputting
the URL address (see below NTP server). You can choose "Do not use network time" if you don't want it to.
14