Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION GUIDE
English
Remove all packing material and accessories. Examine the microwave for any damage, such as dents or
a broken door. Do not install the microwave if it is damaged.
Cover: Remove any protective film from the surface of the microwave cover. Do not remove the light
brown Mica cover that is attached to the oven cavity to protect the magnetron.
Read the contents of each section in the instruction manual for a detailed explanation of all the steps to
be followed in order to
Read the contents of each section in the instruction manual for detailed instructions on how to operate
your new microwave oven correctly.
1. Select a level surface that provides sufficient open space for the inlet and/or outlet vents.
(1) The minimum installation height is 85 cm.
(2) The rear surface of the product must be placed against a wall. Allow a minimum clearance of 30 cm
above the microwave, a minimum clearance of 20 cm is required between the oven and any adjacent
wall.
(3) Do not remove the legs from the bottom of the microwave.
(4) Blocking the inlet and/or outlet openings may damage the microwave.
(5) Place the microwave as far away from radios and televisions as possible. Microwave operation may
cause interference with your radio or television reception.
2. Plug the microwave into a standard household socket. Make sure that the voltage and frequency
match those indicated on the rating label.
WARNING: Do not install the microwave on a hotplate or other heat-producing product. If installed near
or over a heat source, the microwave may be damaged and the warranty will be void.
Surfaces may be hot during operation.
18
infiniton.es
Publicidad
