Mac Mah MOVING-FX BAR Manual De Instrucciones página 28

Static colors
Adjustment
Lyres
C. Use in AUTO or SOUND mode with Master/Slave function.
In Master/Slave MODE, the 1
very practical when you need to do a quick installation with an immediate result. The
following devices must be selected in "SLAV". To do this, the
connected together using an XLR DMX cable.
The desired Auto or Sound mode must then be selected on the 1
will be duplicated on the other linked
are in "SLAV" mode.
D. Use in DMX mode
This mode allows you to control your
Each device must first be "addressed" from 1 to 512.
Press MENU until you see "Addr" then A001, press ENTER, then use the DOWN and UP
keys to select the DMX address you require. Press ENTER to confirm the value.
4-channel DMX protocol :
Stat
S01 - S25
SEtt GobL
CoLL
ddL
PanL
TltL
Gobr
CoLr
Ddr
Panr
Tltr
er
Moving-fx bar controls the following devices. This mode is
Moving-fx bars
Moving-fx bar
Selecting static colours
Adjusting the left-hand gobos
Adjusting the colours of the
left lyre
Adjusting the gobo shake of
the left lyre
Adjusting the pan movement
of the left lyre
Adjustment of
movement of the left lyre
Right-hand gobo adjustment
Adjusting the colours of the
right-hand lyre
Right-hand gobo
adjustment
Adjusting the pan movement
of the right lyre
Adjustment of
movement of the right lyre
Moving-fx bars
Moving-fx bar
er
Moving-fx bars
if the other
with a DMX controller.
the tilt
shake
the tilt
must be
and
28