Eaton TPIPP-LITE U442-DOCK8-GG Manual Del Propietário página 5

Installation
1. Connect the built-in USB-C cable to your source
device's USB-C or Thunderbolt 3 port.
Notes:
• To transfer both video/audio and data signals,
source must support DisplayPort Alt Mode.
• Multi-Stream Transport (MST) is required to
achieve extended dual displays. Displays will be
mirrored under Single-Stream Transport (SST).
Typically, Windows systems support MST, while
Mac systems support SST.
2. With user-supplied HDMI cable(s), connect one
or two HDMI-compliant displays to the docking
station.
3. Connect up to two (U442-DOCK8G-GG) or three
(U442-DOCK8-GG) USB 3.2 Gen 1 peripheral
devices. One dedicated USB-A port provides up
to 7.5A of fast charging power.
4. Insert a Micro SD and/or SD card into the
memory card slots to transfer data to or from
the source device.
5. Charge your source, up to 20V 5A (100W), using
the available USB-C PD 3.0 port.
6. (U442-DOCK8G-GG only) Connect a user-
supplied Cat5e/6 Ethernet cable to the RJ45
port to join a wired Gigabit Ethernet network at
speeds up to 10/100/1000 Mbps.
5