Publicidad
Idiomas disponibles
Idiomas disponibles
Light Kit
Connection
OR
Tilt Switch
Fig 7
Light Kit
Connection
Fold the inner tailgate section down and snap loose the plastic hinge cover on the passenger side to aid in
Tilt Switch
harness routing. Fig 8
Disconnect the negative battery cable.
Continue to route the amplifier harness along the factory harness to the underneath side of the bed near
the back side of the trailer connector. Secure amplifier harness to factory harness with supplied wire ties.
Fig 9
Note: Trim wire tie ends.
Fig 8
Fig 9
5
Publicidad
