AKASO BRAVE 7 Manual Del Usuario página 18

EN EN
16. Screen Saver
Off / 3 Min / 5 Min / 10 Min (Default setting: 1 Min)
Screen saver helps to turn off the display after a period of inactivity to save battery
life. To turn on the display again, press any button or tap the screen on the camera.
17. Auto Power Off
1 Min / 3 Min / 5 Min / 10 Min (Default setting: 3 Min)
The camera will power off after a period of inactivity to save battery life.
18. Power Frequency
50Hz / 60Hz (Default setting: 60Hz)
19. Format Card
Cancel / Confirm (Default setting: Cancel)
To keep your memory card in good condition, reformat it on a regular basis.
Reformatting erases all of your content, so be sure to offload your photos
and videos first.
20. Reset
Cancel / Confirm (Default setting: Cancel)
This option resets all settings to their default values.
21. SD Card Capacity
Check the card capacity and remaining space of your memory card.
22. About
Check the model and software version of your camera.
Note: Some functions cannot be used at the same time. Please refer to the
information below.
1
2
3
Video frame rate >60fps
Auto Low Light
Diving Mode
Image stabilization
Image stabilization
Filter and White Balance
16 15