Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
To prevent vibration and noise, make sure the unit
is installed securely and firmly
I _g
Install the unit where the sunlight does not shine
directly on the unit.
Cooled air i__t _
_
Heat
_[
_
radiation
The outside of the cabinet must extend outward for
_ _=_
at least 12" and there should be no obstacles, such
_
__j_
as a fence or wall, within 20" from the back of the
,,
cabinet because it will prevent heat radiation of the
_o L
_h
Abbot
lj2
condenser,
o/ 1.
Over 20"
Restriction of outside air will greatly reduce the
cooling efficiency of the air conditioner.
Fence
\
\
/
\
_&
AUTION: All side louvers of the cabinet must remain exposed to the outside of the
structure.
Install the unit a little slanted so the back is slightly lower than the front (about 1/2").
This will force condensed water to flow to the outside.
Install the unit with the bottom about 30"~60" above the floor level.
: All supporting parts should be secured to firm wood, masonry, or metal.
• This unit is designed for
installation in standard double
hung windows with actual
opening widths from 23"
to 36".
• The top and bottom window
sash must open sufficiently
to allow a clear vertical opening of
15" from the bottom of the upper
sash to the window stool.
I
Y
_23"
to 36"_
15" min.
Inner sill
_Sash
/
_Window
°__
'" _Offset
• .-" q si,
i
Exterior
Interior wall "- l-'"
°
/
20 1/12" min.
-/
(Without frame curtain) /
12 Room Air Conditioner
Publicidad
