Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
The scooter comes with some minor assembly required, and includes the necessary tools.
1.
If necessary, use the Allen key to remove (rotate left) the side-stand screw (1) located on the left-side of
the scooter.
2.
Place the side-stand (2) into position so the oval hole and locating pin on the scooter line up (A). Reinstall the
site-stand screw and tighten (rotate right) firmly using the Allen key.
3.
Install the right-hand handlebar (3), marked "R", to the "steering head". The right-hand handlebar features a
"left-hand" thread, so you must rotate it left (anti-clockwise) to screw it in. Tighten it firmly by hand.
4.
Install the left-hand handlebar (4), marked "L", to the "steering head" – rotate it right (clockwise) to screw it in,
and tighten firmly by hand.
4
1
2
36
3
R
A
Publicidad
