BELLOTA PL2500N-S Manual Del Usuario página 22

6. Assembly
• Before starting to operate the equipment, its parts and accessories must be properly assembled
and in the correct position.
• Connect the "Y" connector (A) to the pump (1)
• Connect the end (A1) of the hose to one side of the "Y" connector (A).
• Connect the end (A2) of the hose to the handle (B)
• Connect the valve (C) to the handle (B)
• Connect the lance (D) to the valve (C) and finally connect the nozzle (E) to the lance
• Repeat the above steps for the second lance.
• If you want to use the long reach lance (F) just connect to the end (A1) of the hose to the pump
(1) and then connect the end (A2) of the hose to the lance (F).
(E)
(D)
(C)
(B)
(A2)
18
(1)
(F)
Rubber
washer
(A)
(A1)