Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
CONTROL PANEL
1. Temperature setting: Press UP and DOWN button to set temperature. The temperature setting range is
2. °C/°F switch button: Press both UP and DOWN button for 0.5 seconds at the same time, it can switch
3. Light switch: Press to turn the interior light on or off. The light will default to on.
4. Unlock screen: Default unlock status, it will not lock automatically. Press and hold the UNLOCK
button for 3 seconds to lock or unlock the screen.It will show "LC" if press any button
under LOCK status.
5. ON/OFF: To turn on/off the power, press the light button and unlock button for 3 seconds. The default
setting power on.Under off status, "OFF" and inner temperature alternatively show on panel.
SHELF INSTRUCTIONS
To remove a shelf from its locked position, lift the
rear of the shelf upward and then slide the shelf
out of the unit.
To replace the shelf, ensure it is resting securely
on the support brackets and then push inward
until the shelf locks into place.
0-10°C (32°F ~50°F).
between °C and °F.
5
3
4
1
2
INTERIOR LIGHT
To manually operate the interior light, press the light
button on the control panel. This will allow the light
to remain on while the door is closed.
Note: The light will default to on. Due to energy
size, there is no option to have the light turn on when
the door opens.
LEVELING INSTRUCTIONS
There is an adjustable leg on the bottom of the
appliance that can be turned up or down to ensure
that the appliance is level.
1. Turn the leveling leg counter-clockwise as far as
it will go, until the top of the foot is touching the
bottom of the cabinet.
2. Slowly turn the leveling leg clockwise until the
appliance is level.
6
.
Publicidad
