Publicidad
Idiomas disponibles
Idiomas disponibles
Lock function
To lock the oven you must press the lock button, to unlock press again 3 seconds.
Cleaning and maintenance
By ensuring proper cleaning and maintenance of your oven, you can have a significant influence on
the continuing fault-free operation of your appliance.
Before you start cleaning, the oven must be switched off and you should ensure that all knobs
are set to the 0 position. Do not start cleaning until the oven has completely cooled down.
Caution!
If you use a scraper, the sharp blade should always be protected by adjusting the cover (just
push it onto the blade with your thumb).
Injuries are possible so care is required when using a scraper. Keep it out of the reach of
children.
Appropriate light cleaning or washing products are recommended or you can use also a solution of
warm water with a little washing-up liquid or cleaning products for stainless steel sinks.
The oven should be cleaned after each use. When cleaning the oven, turn on the oven light for better
visibility.
The oven cavity should only be washed with warm water and a small amount of washing-up liquid.
Follow up with clean water.
After cleaning, ensure the oven cavity is thoroughly dry.
Caution!
Do not use cleaning products containing abrasive materials for the cleaning and maintenance of the
glass front panel.
WATERSTEAM cleaning function
This function allows you to clean the oven saving money and time. You should follow the next steps:
1. Remove all internal parts before starting the cleaning function.
2. Mix 200ml and a spoon of dishwasher soup.
3. Pour the mixed liquid in the base of the oven.
4. Select the WATERSTEAM function in the temperature and function knob, you should put the knobs
in this position
and leave it for 15 minutes.
5. After the 15 minutes set the oven temperature to 0ºC without removing the function and leave it for
another 20 minutes.
6. After the 20 minutes pass, wipe the internal parts with a soft cloth. You should wipe before 5
minutes passed from last step.
Replacement of the oven light bulb
In order to avoid the possibility of an electric shock ensure that the appliance is switched off
before replacing the bulb.
Publicidad
