Publicidad
Idiomas disponibles
Idiomas disponibles
FAULT
The system does not move
The system does not stop
at the correct position
Power requirement: 110-220 Vac / 60-50 Hz
Stand-by current: 0,2-0,1 A / 110-220 Vac
Max. motor current consumption: 0,6 A / 24 Vdc
Radio frequency chip reception frequency: 868 MHz - 915 MHz
Single control with SINGLE button
Simultaneous control with GROUP button
Manufactured to EU standards
Dimensions: 120 mm x 130 mm x 50 mm
Weight: 320 g
Troubleshooting
POSSIBLE CAUSE
Incorrect wiring
No electrical power
R. F. association not
carried out
Faulty receiver
Incorrect timing
Obstructions in the curtain
work space
Technical Characteristics
3
REMEDY
Check and correct the wiring by following
the instructions in this manual
Restore electrical power
Carry out the association procedure
Request a replacement receiver
Change the timing
Remove obstructions
Publicidad
