Metabo 6.30792 Manual Original página 4

Dust protection filter 6.30835 suitable for original
Metabo angle grinders: W 9-..., WE 11-..., WEV 11-...,
WEA 11-...
Installation of the dust protection filter: see Figure.
Cleaning:
If too much dust is deposited on the dust
protection filter, the cooling to the motor is
reduced and the motor may overheat and become
damaged. Clean the dust protection filter regularly,
frequently and thoroughly by vacuuming or wiping. Prior
to this operation, separate the power tool from the power
source or remove the dust protection filter. When
working, wear goggles and a dust mask.
FRANCAIS
Notice originale
Filtre à poussières 6.30792 compatible avec les
meuleuses d'angle originales Metabo : WP 13-...,
WPB 13-..., WEP 15-..., WEP 17-..., WEPBA 17-...,
WEP 19-...