Costco BB0510 Instrucciones De Montaje página 4

STEP 2: Press the button
of the center joint of the
four hand rails and press
down to a "V" position.
(Fig. 8)
Note: Before pressing
the button, pull up the
center strap of the base
STEP 3: The joint of the
rail must go downwards
on both sides as shown
(Fig. 9).
STEP 4: If the joint of the
rail goes downwards on
only 1 side (Fig. 10),
then you must repeat the
previous steps until the
correct folding procedure
has been followed.
06
Fig.8
Fig.9
Fig.10
STEP 5: Arrange the four legs properly and then place the
product inside the carry bag and fasten it with the straps as
shown in the diagram. (Fig. 11 & Fig. 12)
Fig.11
ZIPPER SECOND LAYER ASSEMBLY:
1. Take out the zipper second layer
2. Attach the zipper(pic1. 2)
Fig.12
07