Publicidad
Idiomas disponibles
Idiomas disponibles
REF. 15049
EN
INSTRUCTION MANUAL
ASSEMBLY INSTRUCTIONS
1. Rotate the lower locking knob clockwise anticloc-
kwise to loosen it.
2. Push the legs out without excessive pressure to
place them in position.
1
3. Rotate the lower locking knob clockwise to fix the
legs in position.
4. Rotate the lower locking sleeve to the right to loo-
sen it.
5. Set the middle telescopic tube to the desired leng-
th, adjustable up to a maximum of 32.5cm
6. Rotate the lower locking sleeve to the left to fix the
middle telescopic tube to the desired length.
5
2
3
4
6
7. Rotate the upper locking sleeve to the right to
loosen it, and place the upper telescopic tube to
the desired length, adjustable up to a maximum
of 28cm
8. Rotate the upper locking sleeve to the left to fix the
upper telescopic tube to the desired length.
7
9. Fit the led working light cross-beam to the tripod
head.
10. Lift the two small clips on the tripod head.
9
11. Fit the two small clips into the big clip and press
the black lever downwards to fix the led working
light in place
12. The led working light is now properly fixed onto the
tripod and ready to use.
11
· 3 ·
7
8
10
12
12
Publicidad
