Mach Power EB-WT10464A Manual Del Usuario página 2

Thank you for purchasing one of our products.
Read this information before use
1. Do not use this product at an altitude higher than 2000 meters.
2. Avoid bumps and falls.
3. Do not use in excessively hot, excessively cold, high humidity and dusty environments, keep away
from direct sunlight.
4. Do not use the device in the presence of magnetic fields or with high static.
5. In case of accidental spillage of water or liquids on the device, turn off immediately and let it dry,
try to turn it on again.
6. To avoid damage due to corrosion and humidity, do not clean the device with detergents, even
chemical based. Use a soft dry cloth.
7. Our company is not responsible for data loss due to software or hardware malfunction.
8. It is advisable to back up the data regularly.
9. Do not open the device to avoid losing the warranty.
10. Device manual and software are updated periodically and without notice. Always refer to the
product in possession.
11. It is advisable to use the original charger, in order to avoid damage to the device.
12. If you need to buy a charger, only buy chargers with CCC certificate and which meet the require-
ments.
Package contents
1 EB-WT10464A
1 Charger
1
Cable
1 User Manual
BASIC OPERATIONS
1. Turn ON / OFF the device
Turn ON: Press and hold the power key for a few seconds to turn on the device.
Turn OFF: Click on the Windows icon in the lower left corner and click on Shut down, or press and
hold the power button for a few seconds until the device turns off.
2. Reload
Charging: Connect the cable to the charger and insert the end of the cable into the Micro USB port
to start charging. (It is possible to use the device while charging, but to increase the battery life it is
advisable not to use the device).
3. Micro SD Card
Insert Micro SD card: The device can automatically play audio and video files on a Micro SD Card.
Make sure you insert the card in the correct direction.
Note: Do not remove the Micro SD Card while the device is reading the files.
2