Irradio STV-IR-42100-FIX Instrucciones De Montaje página 6

(figure 2)
wall
TV
wall
(figure 7)
main plate
Removing the TV from the wall mount
To remove your TV from the wall plate assembly, disconnect all cables and then reserve the proce-
dures.
Care and maintenance
As a good practice of care and maintenance, carry out periodic checks on the tightening of the an-
chors and check the integrity of the product.
Drill the marked place with a drill, then insert the plastic dowel into
the hole (Figure 2).
Fix it so that the hole in the middle of the main plate coincides with
the dowel, fix the triphone screw with a screwdriver (Figure 3).
(figure 4)
(figure 5)
Hang your TV on the wall in figure 6 and complete the instal-
lation (Figure 7).
Balance the fixed body with the buuble le-
vel and mark the other holes with a pencil
(Figure 1), drill the marked places with a
drill and insert the plastic dowels into the
holes (Figure2).
Fix the main plate so that the holes coin-
cide with the plastic dowels (Figure 4) and
fix the screws with a screwdriver (Figure 3).
Adjust the carrier arms and
the screws to the match the
holes on the back of your
TV (Figure 4) and fix the
screws with the screwdriver
(Figure 5).
(figure 6)
ATTENTION!
Screwdriver and drill aren't in-
cluded.
The product is automatically
locked, the carrier arm cannot
move when it comes to the
end.