i-PRO WV-U35401-F2L Guia De Instalacion página 7

Standard accessories
Important Safety Instructions ............................. 1 pc.
Bit 1× (Hex wrench,
screw size 6.35 mm
{1/4 inches} T10)
Template 1×
Other items that are needed (not included)
⿟Mounting screws
Installation method
Directly mount the camera onto the installation surface M4 × 16 mm {5/8 inches}*
Mount the camera to a two-gangbox/junction box.
Mount the camera using the exclusively designed
mount bracket.
*1 Select screws according to the material of the location that the camera will be mounted to. In this
case, wood screws and nails should not be used.
*2 This value indicates the minimum pull-out strength required value per screw. For information about the
minimum pull-out strength, refer to our technical information website <Control No.: C0120>.
*3 The screw length is an example when installing the camera on a robust installation surface with a
thickness of 20 mm {25/32 inches} or more.
⿟ Ethernet cable with RJ45 plug (category 5e or better, straight, all 4 pairs (8 pins), less than 100m
{328 feet})
RJ45 waterproof
connector cover ・ cap 1×
Waterproof rubber A
(Black) 1×
Recommended screw
× 3 pcs.
M4 × 16 mm {5/8 inches}*
× 2 pcs.
Refer to the operating instructions of each
bracket.
7
Waterproof rubber B
(White) 1×
Minimum pull-out
*1
strength
*2
3
196 N {44 lbf}
3