Forging Mount HY9441-B Manual De Instrucciones página 7

CAUTION:
MUST BE firmly tightened to prevent unwanted movement of the wall plate
CAUTION:
on to the next step.
01
Avoid potential personal injury or property damage! All lag bolts
Ensure the wall plate is securely fastened to the wall before continuing
03
Position the wall plate
desire height .Level the wall plate
and mark the pilot hole
01
locations.
� in. ��mm
Drill pilot holes using a 3/8 in(10mm)
masonry drill bit.
IMPORTANT: Pilot holes must
be drilled to a depth of 3 in(75mm).
Don't drill into the gap between
blocks
A
01
at your
01
P5