Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION SHEET
FLYKILLER
RANGE CAPTURE
INFORMATIONS RESERVED ONLY FOR
MAINTENANCE SERVICING
INSTRUCTION SHEET
Before making any form of maintenance,
assure that the device is disconnected from
the electricity network.
For an easy and fast maintenance, all the
models open opposite before, allowing an
access to all the components.
Open the frontal railing by making turn
upward until clips of preservation high
position.
Cleaning insect collector :
Take Out the collector for cleaning
Put back in position the collector
after cleaning
Tubes replacement
Dismantling / Reassembly of tubes
by simple quarter of ballot.
Starters' replacement
Starters are placed in the deck over the
upper tube opposite before.
Dismantling / Reassembly of the starter by
simple quarter of ballot.
Cordon sector replacement
- If the cordon is damaged he must be
replaced
by
his
manufacturer
or
a
competent person to avoid quite risks.
Glueboards replacement
- The change of the glueboard of birdlime
is made by the highly-rated.
- Take out the glueboard by the highly-
rated.
- Having removed the protective film of the
glueboard of birdlime, having inserted it by
the highly-rated into the rail of guide.
THE RANGE
CAPTURE is a modern answer to flying insect
control where hygiene is an important
consideration.
WARNING
CAPTURE MUST ONLY BE USED IN AREAS
WHICH ARE FREE OF DUST AND POSSIBLE
EXPLOSIVE VAPOUR MIXTURE. SHOULD YOU
HAVE ANY QUERIES CONTACT YOUR LOCAL
FIRE AUTHORITY FOR ADVICE BEFORE
INSTALLATION.
CAPTURE IS ONLY SUITABLE FOR INDOOR
USE AND IS NOT SUITABLE FOR USE IN
BARNS, STABLES and SIMILAR LOCATIONS.
This fly killer is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience of
knowledge, unless they have been given by a
person responsible for their safety, monitoring or
instruction concerning use of the appliance (A2/EN
68335-1). It should supervise children to ensure
they don't play with the fly killer.
CARACTERISTICS
CAPTURE 30
CAPTURE 30
Model
300/400/800 Glu
300/400/800
2x15W (28cm)
2x15W (28cm)
2x15W (43cm)
2x15W (43cm)
Power
2x18W (61cm)
2x18W (61cm)
2x36W (61cm)
2x36W (61cm)
Application area
To 50m² at 240m²
To 50m at 240m²
40W maxi
40W maxi
40W maxi
40W maxi
Consumption
60W maxi
60W maxi
100W maxi
100W maxi
Electrocution grid
No grid
3000 V
Power supply
230V / 50Hz
230V / 50Hz
Weight
To 2.6Kg at 5.0Kg
To 3.4Kg at 5.75Kg
Exploded view
Composant
30i
30G
300i
Tube
2x TCLEO15W
2x TCLEO15W
2x T15W
Sta rter
2x S2
2x S2
2x S2
Doui l l e
4x D285FAU
4x D285FAU
4x D1345FAU
Bal l a s t
1x B30WF
1x B30WF
1x B30WF
Pl a que de gl ue
NA
1x PL195X310CN2
Gri l l e é l ec
1x GE40
NA
1x GE09i
NA
Tra ns fo
1x TRFHTF
1x TRFHTF
NA
Swi tch
1x POUSDESIP
1x POUSDESIP
POSITIONING
CAPTURE unit should preferably be fixed in the darkest
place within the area to be protected, away from windows
and skylights, thus avoiding any competition with natural
daylight or sunlight.
In large open areas where two or more units are required,
siting needs careful consideration to ensure maximum
protection. Each unit within a certain area should be
centrally positioned.
The wall mounting is carried out by means of suitable
equipment (bolts, screws, etc...) to the weight of the unit.
SERVICING
BEFORE ANY FORM OF SERVICING, ENSURE THAT
THE UNIT IS DISCONNECTED FROM THE MAINS
SUPPLY.
To maintain the unit efficiency, replace the UV
fluorescent bulb every 12 months.
IF ANY DOUBTS ARISE REGARDING THESE
INSTRUCTIONS, PLEASE CONTACT YOUR
SUPPLIER.
GUARANTEE
CAPTURE is guaranteed for 5 years (excluding
replacement bulbs). If a fault occurs, contact your local
supplier.
REFERENCE COMPOSANTS SAV
300G
400i
400G
800i
2x T15W
2x T18W
2x T18W
2x T36W
2x S2
2x S2
2x S2
2x S2
4x D1345FAU
4x D1345FAU
4x D1345FAU
4x D1345FAU
1x B30WF
1x B36WF
1x B36WF
2x B36WF
NA
NA
NA
1x PL195X460CN2
1x PL195X460CN2
NA
1x GE11i
NA
1x GE11i
NA
NA
1x TRFHTC
1x TRFHTC
NA
NA
1x POUSDESIP
1x POUSDESIP
800G
2x T36W
2x S2
4x D1345FAU
2x B36WF
1x PL195x610CN2
NA
NA
NA
Publicidad
