Technics SB-G90M2E-K Mark 2 Instrucciones De Funcionamiento página 17

Connections
Connecting the speaker cables
The speakers are not supplied with speaker cables. For connection, use commercially-available speaker cables.
Speaker (rear)
2 Tighten the knobs.
1 Turn the knobs to loosen them, and
insert the core wires into the holes.
Do not insert the vinyl insulation.
- (Black) + (Red)
If it is difficult to connect the speaker cables, loosen the knobs as far as possible, then connect.
≥ Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the amplifier.
DO NOT
16 (016)