Descargar Imprimir esta página

BGS technic 65630 Manual De Instrucciones página 2

Juego de reparación para calentadores

Publicidad

Idiomas disponibles

Idiomas disponibles

ATTENTION
Read the all safety information contained therein
carefully before using the product. Use the
product correctly, with care and only according
to the intended purpose. Non-compliance of the
safety information may lead to damage, personal
injury and to termination of the warranty. Keep
these instructions in a safe and dry location for
future reference. Enclose the safety information
when handing over the product to third parties.
INTENDED USE
The tools included in this set are designed for the following work:
The reamer M10x1 (No.1) is used to clean the glow plug tip guides on Mercedes-Benz 3, 4, 5 and 6
cylinder engines 611, 612 and 613, as well as Smart CDI R660.
The reamer M12x1.25 (No.2) is used to clean the glow plug tip guides on Mercedes-Benz 4-valve
engines 604, 605 and 606.
The glow plug extractor (No.3) is used to remove stuck glow plugs with a wrench size of 10 mm on
Mercedes-Benz engines 611, 612 and 613.
SAFETY INFORMATIONS
Keep children and other persons away from the working area.
Do not allow children to play with this tool or its packaging.
Do not use the tool if parts are missing or damaged.
Use the tool for the intended purpose only.
Never place the tool on the vehicle battery. There is a risk of a short circuit.
Be careful when working on running engines. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
Be careful when working on hot engines because of the risk of burn injuries!
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage and personal injuries.
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
Before use, compare the outer diameter of the reamer with that of the glow tip of the glow
plug.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Glow Plug Repair Tool Set
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 65630
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed

Publicidad

loading