Maintenance, Cleaning And Recalibration; Maintenance; Cleaning - WIKA GIR-10 Manual De Instrucciones

7. Maintenance, cleaning and recalibration

7. Maintenance, cleaning and recalibration

7.1 Maintenance

This gas presence detector is maintenance-free.
Repairs must only be carried out by the manufacturer.
This does not apply to the battery replacement.

7.2 Cleaning

CAUTION!
Physical injuries and damage to property and the environment
Improper cleaning may lead to physical injuries and damage to property
and the environment. Decomposition products in the dismounted
instrument can result in a risk to persons, the environment and equipment.
▶
Carry out the cleaning process as described below.
Suitable cleaning agents
Water
■
Conventional dishwashing detergent
■
Cleaning the instrument
Prior to cleaning, remove the power supply unit.
1.
Wipe the instrument surface using a soft, damp cloth.
2.
Electrical connections must not come into contact with moisture!
CAUTION!
Unsuitable cleaning agents
Cleaning with unsuitable cleaning agents may damage the
instrument and the product label.
▶
▶
▶
7.3 Recalibration
We recommend that the instrument is regularly recalibrated by the manufacturer, with
time intervals of approx. 1,200 hours of operation or at the latest after 2 years. The basic
settings can be corrected if necessary.
In addition, the gas presence detector can be calibrated by the operator in order to
reach a maximum accuracy in the critical range.
WIKA operating instructions gas detector, model GIR-10
Do not use any aggressive cleaning agents.
Do not use any hard or pointed objects.
Do not use any abrasive cloths or sponges.
EN
21