JBM 52428 Manual De Instrucciones página 3

REF. 52428
EN
INSTRUCTION MANUAL
This hand pump is used to pump oils, lubricants, diesel and oil-based fluids.
OPERATION
1. Apply a little oil or seal tape in the thread.
2. Thread the pump input standpipe into the pump assembly.
3. Put a little engine oil into the pump assembly before using and then twirl the handle to pump
the oil.
CAUTION
This hand pump cannot be used to pump water and corrosive liquid.
MAINTENANCE
Dry the outside of the pump and then store it in a ventilated place.
SPECIFICATIONS
Maximum rate of flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 L/Min
Maximum standpipe length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1016mm
Bung adapter thread diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2" NPT
Pump material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cast Aluminum
Pipe material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aluminum
B
A
E
F
C
D
Ref.
A Rotary pump assembly
B Gooseneck pipe (5/8")
C Expandable output flex-hose
D Bung adapter assembly
E Pump input standpipe (1 1/4"x13 7/8")
F Standpipes (1 1/4" x 13 5/8")
G Filter screen
G
· 3 ·
Descripiton Qty.
1
1
1
1
1
2
1