Brevi Nanna Oh 855 Manual De Instrucciones página 27

Do not leave any object inside the product that could reduce its depth.
Do not leave small objects inside the product to prevent choking
hazards.
Do not adjust the product with the child inside..
Do not position the cot near walls and obstacles to prevent trap-
ping hazards.
Use only spare parts approved by the manufacturer
Do not apply accessories to the product, which are not supplied
by the manufacturer.
The product must be kept away from electric cables and cords:
do not place the product near windows where cords, curtains or
similar objects could pose9
chocking or strangling hazards for the child.
To avoid strangling hazards, do not give to your child or place near
him, objects equipped with cords.
A prolonged exposure to the sun may cause changes of tones to
the product's colour
After a prolonged exposure of the product to high temperatures,
wait a few minutes prior to placing your child in it.
When not in use, keep the product away from the reach of children.
Height Adjustment of the cot: refer to the picture. 1.
Two wheels on the frame allow easy move of product.
Crib use
IMPORTANT: make sure that the side rail is raised and the zippers
are completely closed before use (pic.2)
WARNING: the crib can be inclined with a maximum variance of 2
positions between one leg and the other (for example: the right leg
in position 3 and the left leg in position 5, see fig. 3)
WARNING: The head of the child should always be positioned on
the highest side
IMPORTANT: always make sure that the side rail is raised and the
zippers are completely closed
The thickness of the mattress chosen shall be such that the inter-
nal vertical height (surface of the top of the mattress to the upper
edge of the bed sides) is at least 200 mm.
The reference mark on the product's interior indicates the maxi-
mum thickness of the mattress that shall be used.
Rocker function
IMPORTANT: make sure that the side rail is raised and the zippers
are completely closed before use. (pic.4)
WARNING: in the co-sleeping mode the 2 legs of the crib
should always be adjusted to the same height. (pic.5)
The thickness of the mattress chosen shall be such that the inter-
nal vertical height (surface of the top of the mattress to the upper
edge of the bed sides) is at least 200 mm.
The reference mark on the product's interior indicates the maxi-
mum thickness of the mattress that shall be used.
Co-Sleeping mode
855-94-160901-00 ISTR.CULLETTA NANNA OH BREVI .indd 27
Always use ALL the required components for each of the use
modes.
Check the instruction manual for a list of the required components.
Periodically check product for loose, damaged, or missing parts.
In order to fix the crib to the parents bed (co-sleeping mode)
use the pair of straps F provided.
DO NOT use in co-sleeping mode if any part is missing, dama-
ged, or broken.
Contact BREVI for replacement parts and instructional literature
if needed.
DO NOT replace parts.
WARNING – IMPORTANT FOR YOUR CHILD'S SAFETY
This mode is possible with bed types complying with all of the fol-
lowing conditions. (pic.6)
Use of the product with round beds and/or mattresses or water
beds is not permitted
WARNING: Do not use when the child can sit or kneel or pull itself up
All opening, adjusting, anchoring and positioning operations of the
product must be carried out exclusively by an adult..
The crib should be fixed to the parent's bed (co-sleeping mode).
The side support of the crib should always be put
close to the parent's mattress and the mattress should always be ali-
gned with the height of the side support for restraint of the crib. (pic.7)
The crib should be firmly fixed to the structure of the parents bed
or to the mattress support (net or slats).
WARNING: Check to make sure that the crib in the co-sleeping
mode does not interfere with the parent's bed.
WARNING: During use, make sure that the parents bed sheets,
blankets etc. do not enter and cover the interior of the crib
WARNING: Rocking function is not allowed in co-sleeping mode
WARNING: the 2 legs of the crib should always be adjusted to the
same height.
IMPORTANT: the crib should always be fitted to the long
side of access to the bed.
Entrapment Hazard:
To prevent death from entrapment, in co-sleeping mode the pro-
duct must be pro¬perly secured to parent's bed using the attach-
ment system. (pic.7)
(1) WARNING: before every use always check to
make sure that there is no space between the parent's mattress
and the side of the crib
(2) Before every use pull the belts firmly to tighten until there's
no space.
(3) If there is space between the parent's bed and the crib, DO
NOT use product.
Do not fill the space between the parent's bed and the crib with
pillows, blankets or other items. There might be suffocation ha-
zards.
Replacement mattress must have same size of Brevi mattress or
thinner.
27
05/09/2016 10.41.11