Product Description; Designations Of The Components Shown (Figure A - F) - ABNOX AXDV-C1 Manual De Instrucciones

EN
• Deficient monitoring of the machine parts that are
subject to wear.
• Improperly completed repairs or use of third-party
components.

Product Description

Intended Use
The dosing valve is designed for volumetric dosing of
non-abrasive lubricants.
Labelling
The dosing valve is labelling in accord with the type
key (Figure E) .
Function
The pneumatic part of the dosing valve (Figure F)
is controlled using compressed air via an external
pneumatic 5/2-way valve or the attached handle.
This initialises the dosing in the hydraulic component
to the extent that the dosing valve is attached to an
active pump. The duration of dosing depends on the
setting for the medium pressure.
20
Designations of the components
shown (Figure A – F)
1 Medium outlet
2 Connection block
3 Medium inlet
4 Adjustment screw
5 Pneumatic connections
6 Dosing screw
7 Dosing trigger rod valve
8 Dosing trigger PN- valve
9 Mounting bracket
10 Dosing trigger handle
11 Mounting hook
12 Magnetic field sensor (optional)