Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING! This appliance is not to be used if it has been
EN
dropped, if there are visible signs of damage or if it is leaking
water.
WARNING!
WARNING!
WARNING! Keep the lid closed when the appliance is
switched on.
WARNING!
during operation.
ATTENTION! The surfaces of the appliance can become
very hot during use; do not touch the hot parts, such as the
body and lid of the kettle during or after use. Always use
the handle.
Proceed as follows after having assembled the appliance:
•
Unroll the power cable (9) from the electrical support (7)
•
Insert the plug (9) in the socket.
•
Open the lid by pressing the relevant button [Fig C] and fill the kettle at least up to the indicated
minimum level (4)
•
Place the kettle on the electrical support (7)
•
Lower the on/off lever (5) to turn the kettle on
•
The kettle switches off automatically when the water boils.
•
At the desired temperature, raise the on/off lever (5) until the LED goes off
•
Turn the kettle off by raising the on/off lever (5) until the LED goes off or remove the kettle from the
electrical support (7)
•
Remove the kettle from the electrical support and slowly pour the water.
WARNING! Always disconnect the appliance from the mains
supply before cleaning or performing maintenance.
12
DO NOT move the appliance while it is working.
DO NOT fill over the MAX level.
DO NOT insert your fingers into the product
CLEANING AND MAINTENANCE
USE
Publicidad
