Levenhuk Ermenrich Zing TC20 Guia Del Usuario página 5

Specifications
Max. voltage
Max. current
Voltage measurement range
Max. measured voltage drop
Resistance measurement range
Capacitance measurement range
Overload protection
Overvoltage category
Input impedance
Counts
Non-contact voltage detection (NCV)
Diode test
True root-mean-square measurement (True RMS)
Sound alert
Auto-off
Backlight
Operating temperature range
Power supply
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.
Care and maintenance
Always test the device prior to using it. Use the device only within the permitted range. Failure to follow these instructions may result
in electric shock, fire and/or personal injury. When measuring voltage, do not exceed the input voltage of DC 1000V or AC 750V. When
changing functions and ranges, always remove the test probes from the test points. Do not use the device if it is not working properly.
Please note that the parameters of the power supply must comply with the technical characteristics of the device. Do not try to
disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local specialized service
center. Protect the device from sudden impact and excessive mechanical force. Store the device in a dry cool place. Only use accessories
and spare parts for this device that comply with the technical specifications. Never attempt to operate a damaged device or a device with
damaged electrical parts! If a part of the device or battery is swallowed, seek medical attention immediately.
Battery safety instructions
Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one
time; taking care not to mix old and new ones, or batteries of different types. Clean the battery contacts and also those of the device prior
to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and –). Remove batteries from equipment
that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high
temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Remember to switch off
devices after use. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation, or poisoning. Utilize used batteries as
prescribed by your country's laws.
Levenhuk International Warranty
Levenhuk products, except for their accessories, carry a 5-year warranty against defects in materials and workmanship. All Levenhuk
accessories are warranted to be free of defects in materials and workmanship for six months from the purchase date. The warranty entitles
you to the free repair or replacement of the Levenhuk product in any country where a Levenhuk office is located if all the warranty conditions
are met.
For further details, please visit: levenhuk.com/warranty
If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.
750V AC, 1000V DC
10A
6V AC/DC, 60V AC/DC, 600V AC/DC, 750V AC / 1000V DC
600mV
600Ω / 6kΩ / 60kΩ / 600kΩ / 6MΩ / 60MΩ
10nF / 100nF / 1µF / 10µF /100µF / 1mF / 10mF / 60mF
750V AC, 1000V DC, 10A
Cat. IV
10MΩ
6000
+
+
+
+
15 min.
+
0... +40°C / 32... +104°F
2pcs AAA 1.5V alkaline batteries
5