Descargar Imprimir esta página

Host Reliant Manual De Instrucciones página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

GROUNDING INSTRUCTIONS
This machine must be grounded. If it should malfunction or
break down, grounding provides a path of least resistance
for electric current to reduce the risk of electric shock. This
machine is equipped with a cord having an equipment-
grounding conductor and grounding plug. The plug must be
inserted into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
WARNING: Improper connection of the equipment-grounding
conductor can result in the risk of electric shock. Check with
a qualified electrician or service person if you are in doubt as
to whether the outlet is properly grounded. Do not modify the
plug provided with the machine. If it will not fit the outlet, have
a proper outlet installed by a qualified electrician.
This machine is for use on a nominal 120 volt circuit, and has
a grounded plug that looks like the plug illustrated in Diagram
A. A temporary adapter that looks like the adapter illustrated
in Diagram B may be used to connect this plug to a 2-pole
receptacle as shown in Diagram C if a properly grounded
The electrical cord on the Reliant has been designed to give the proper power to the motor through both the gauge and length
of the cord. Do not use an extension cord. The grounding plug at the end of the cord should NOT be removed.
TROUBLESHOOTING
PROBLEM
Reliant does not run.
How to Remove Tough Spots & Spills with the Reliant
Prepare the spot, for dry spots and spills, vacuum area first, or for wet spots and spills blot or scrape
area first. Scatter HOST Dry Extraction Cleaner on the spot. Concentrate the brushing in a circle over
the spot. Brush an area slightly larger than the area with the spot. A er brushing, vacuum up with a
standard vacuum.
If carpet is very dirty or has tough spots and spills, PREP® Tra ic Lane Booster may be necessary. To
use PREP mix 1 part PREP in 4 parts water in a trigger spray bottle, then mist PREP lightly on dirty
carpet/spot. Apply HOST Dry Extraction Cleaner as before and brush with Reliant then vacuum.
CAUTION: Improper use or dilution may cause damage to surface and increased risk of health e ects.
THE CLEANING SYSTEM that makes A DIFFERENCE
POSSIBLE CAUSE
Power cord is not properly secured in
the power cord receptacle.
Blown a fuse.
Not turning the motor switch on.
hostdry.com | 800-558-9439
outlet is not available. The temporary adapter should be used
only until a properly grounded outlet can be installed by a
qualified electrician. The green colored rigid ear, lug, or the like
extending from the adapter as illustrated in Diagram B, must be
connected to a permanent ground outlet box cover. Whenever
the adapter is used, it must be held in place by a metal screw as
shown in Diagram C.
Note: In Canada, the use of a temporary adapter is not
permitted by the Canadian Electrical Code.
POSSIBLE SOLUTION
Check the power cord is properly secured in the power cord
receptacle on the top of machine hood.
Fix fuse.
Turn the motor switch on. If the switches are on and it still
doesn't run, it should be returned to the manufacturer or
authorized repair center. Contact your HOST Distributor.
9

Publicidad

loading

Productos relacionados para Host Reliant