Defiant 17000215 Guía De Uso Y Cuidado página 7

Installation (continued)
4
Mounting the solar panel
IMPORTANT: Caulk around the base and on top of the screw heads
after installation.
Place the solar panel (E) against the mounting
surface and mark the mounting holes.
If mounting to a wooden surface, drill two
3/32 in. holes into the mounting surface.
Install the two mounting screws (AA)
through the base and into the mounting
surface.
5
Adjusting the solar panel
Rotate the solar panel (E) to the desired angle.
IMPORTANT: The solar panel must receive as much direct sunlight
over the course of the day as possible. Keep in mind that shadows
may block the sunlight from reaching the solar panel during the day.
If mounting to wall board or brick, drill two
7/32 in. holes into the mounting surface.
Insert the wall anchors (BB) and attach the
AA
E
7
Please contact 1-866-308-3976 for further assistance.
BB
E
HOMEDEPOT.COM