Style selections TPGAZ2236 Manual Del Usuario página 11

INSTALLATION INSTRUCTIONS
6
Hardware Used
DD
FF
NN
F1
B1 B2
6.1 Insert one end of the mosquito net tube (E1) into the beam connector (F1), pass the mosquito net (E1)
through the spacer block (NN) to connect the other end onto the cross beams (B1/B2) with bolt (DD/FF).
Then tighten them with wrench (JJ). Place cap (HH) onthe bolt heads.
6.2 Insert one end of the mosquito net tube (E2) into the beam connector (F2), pass the mosquito net (E2)
through the spacer block (NN) to connect the other end onto the cross beams (B3/B4) with bolt (DD/FF).
Then tighten them with wrench (JJ). Place cap (HH) on the bolt heads.
Repeat the step for another assembly.
B2
E1
B3 E2
F2
B4
E2
E1
NN
FF
E1
DD
HH
HH
JJ
F1
B1
E1
E1
E1
B1 B2
F1
B4
11
E2
B4
F2
E2
B3
F2
NN
B3
FF
E2
DD
HH
E2