Allen + Roth TPGAZ2341 Manual Del Usuario página 11

ASSEMBLY INSTRUCTIONS
3
SS
C2
CC
VV
SS
CC
C5
VV
C1
C3
C4
C5
C4 C3
C3
C4
C5
C2
C1
C5
C3
C4
25mm 25mm
NOTE: The horizontal center of the Beams (C1, C2) should be
aligned with that of the Beams (C3, C4, C5).
C2
C1
C5
C4
C3
3.1. As shown in the figure, fix the screws T-Nut (MM) onto the lintels. Knock the T-Nut (MM) into the
lintel, making sure the T-Nut (MM) are flush with the lintel.
3.2. Connect the beam (C1/C2) and beam (C3/C4/C5) with bolts (CC), washer (VV) and cap (SS).
11