Publicidad
Idiomas disponibles
Idiomas disponibles
¢ ean hot P$, Pressure
Washer
CleanShot
Pressure Washer
Rinsing
For
Rinsing:
H.
SHide the nozzHe backward
to high pressure,
press the
trigger
and wait
for the detergent
to dear.
NOTE:You
can aHso stop
detergent
from
flowin 8 by simpHy
removing
chemicaH injection
hose from
bottHe.
2.
Keep the spray gun a safe distance
from
the area you
pHan to spray.
WARNING
Keep spray nozzre between
8 to 24 inches away from cleaning
sIJ_ace.
Operate
this unit on a stabJe surface.
Be extremei7
careful if you must use the pressure washer" from
a iadder; scaffolding or any other relatively
unstable iocadon.
Firmly grasp spray gun with both hands when using high
pressure spray to avoid injury if gun kicks back.
3.
Apply a high pressure spray to a small area, then check
the surface for damage.Adjust
spray pattern or move
spray nozzle further
away from cleaning surface, if
necessary.
4. Startat the top of the areato be rinsed, w orking
down with same overlapping strokes as you used for
washing and applying detergent.
Cleaning
Chemical
Injection
Hose
If you used the chemical
injection
hose, you must
flush it
with
clean water
before
stopping
the engine.
I.
Place chemical
injection
hose in a bucket
full of clean
water.
2.
Slide adjustable
nozzle
forward
to low
pressure
position.
Flush for 1o2minutes,
Automatic
Cool
Down
System
(Thermam
Relief}
If you run the engine
on your
pressure
washer
for
3°5 minutes
without
pressing
the trigger
on the spray gun,
circulating
water
in the pump
can reach
temperatures
above
125°EThe
system
engages to cool the pump
by
discharging
the
warm
water
onto
the
ground.
UU
Publicidad
