Crafstman 113.179100 Manual Del Propietário página 10

Assembly (continued)
Insert Hose
Insert the push button end of the
Pos-I-Lock® premium hose into the inlet
of the Vac. The hose should snap into
place. To remove the hose from the Vac,
press the release button in the hose
assembly and pull the hose out of the Vac
inlet, as shown.
On the 17915, press the curved metal
extension wand into the coupling ring of
the hose end. Join the two metal
extension wands, aligning the button and
hole so they snap together.
Attach the accessories, aligning the
button and hole so they snap together.
Metal_ \ | _'?,',/ i
Extension \ \ _, __U /
,Co,voO,
Metal _ \
Extension \ \
Wand \ \
Accessory Storage
Your accessories may be stored in the
removable accessory bag. The hose may be
stored by wrapping it around the unit and
placing each end into the two areas marked
Hose Storage. The extension wands can
be stored in the holder sleeves of the
accessory bag as shown.
Accessory Storage Compartment
Wand
Wand
Storage
e Storage
Area
10