ADE KT102 Manual De Instrucciones página 41

5. Press START/STOP to mute the timer or
wait approx. 1 minute until the timer mutes
automatically.
6. Press the HR/+ and MIN/- buttons
simultaneously to zero the display so that it
stops flashing.
7. Sliding the mode switch back to CLOCK
returns to the time/date display.
Pay attention to the following:
‚ Via START/STOP you can interrupt the
countdown at any time and then start it
running again.
‚ With the timer running, you can still use the
mode switch to return to the time display
(set to CLOCK). The countdown continues
to run in the background.
‚ The display must be reset to zero (press the
HR/+ and MIN/- buttons simultaneously)
before you can enter the period.
41