Publicidad
Idiomas disponibles
Idiomas disponibles
BATTERY CHARGE
- The battery must be charged to 100% before first use.
- The charger used must be 5V and have an amperage of up to 2A maximum.
- When plugged in to charge, a red light comes on indicating "charging".
The pilot light goes out when charging is complete.
- Charging should never be interrupted once plugged in to charge.
- The charging time will depend on the amperage of the charger used.
- Do not turn on the speaker while it is charging.
- If you are not going to use the speaker for a while, you should keep the battery charged.
Charge the battery at least once a month.
If the battery runs out of charge it can be damaged.
CONNECT TO BLUETOOTH DEVICE
Turn on the speaker and turn on your Bluetooth mobile device, then search for the
speaker model name "GR-65" and select it to pair.
Once the Bluetooth is paired, the speaker will automatically connect the next times it is
turned on.
BLUETOOTH MODE
The speaker directly enters Bluetooth mode when you turn it on. After pairing the device,
you can play the music, short press ►ll to play/pause, long press ◄◄ and ►► to
previous/next song.
Short press - / + to decrease or increase volume.
TWS FUNCTION
1. Powered on two GR-65 speakers and make sure that both speakers are on the
Bluetooth mode.
2. Don't connect to any Bluetooth devices.
3. Double click the "M/TWS" button (I), and it will have a tone coming out that means in
the pairing mode.
4. It will pair both units together after a few seconds along with a tone coming out after
connected successfully.
5. Turn on the Bluetooth devices and searched the pairing name of "GR-65" and tap to
connect it.
6. Now you can play the music from your Bluetooth devices.
USB/TF MODE
Insert a MicroSD card into the TF slot or a pen drive into the USB port,
the speaker will read the music in MP3 format automatically. Press ►ll to Play / Pause,
long press ◄◄ and ►► to previous or next song.
Short press - / + to decrease or increase volume.
Publicidad
