Kingfisher D003A-12L Manual De Instrucciones página 86

NOTE:
1. Do not remove the float from the water tank. The
water full sensor will no longer be able to detect the
water level correctly without the float and water may
leak from the water tank.
2. If the drainage tank is dirty, wash it with cold or
lukewarm water. Do not use detergent, scouring
pads, chemically treated dust cloths, gasoline,
benzene, thinner, or other solvents, as these can
scratch and damage the tank and cause water
leakage.
3. When replacing the drainage tank, press the tank
firmly into place with both hands. If the tank is not
positioned properly, the "TANK FULL" sensor will be
activated, and the dehumidifier will not operate.
Continuous Water Drainage
The unit features a continuous drainage port. Using a plastic pipe (with an inner diameter of 10mm) inserts
into drain hole (on intermediate plate), reach out from side of water tank, install it in place, and arrange the
drain pipe.
The water in the drainage tank can be continuously drained out from the continuous port on the unit.
Remark: Hose end must be below the draining plug level.
5063022047595_MNL_IN_V03.indb 86 5063022047595_MNL_IN_V03.indb 86
86
30/11/2022 10:08 AM 30/11/2022 10:08 AM