Publicidad
PASO 19
Version B: Installing the Wi-Fi antenna: antenna preparing
Remove the nut with the washers from the antenna connector.
The antenna connector is prepared.
The latest version of the connector has a thicker washer. We don't need it anymore.
You can throw it away.
Insert the antenna connector into the same-shaped hole in the Wi-Fi-antenna-
holder .
PASO 20
Version B: Installing the Wi-Fi antenna: antenna preparing
Push the antenna connector through the Wi-Fi-antenna-holder.
Insert the thinner washer back onto the connector.
Using the universal wrench, tighten the nut on an antenna connector.
Good job! The Wi-Fi antenna is prepared.
Original Prusa XL Mono Cabezal (Semi-Ensamblada)
5. Montaje extrusor y accesorios
77
Publicidad
