RS Pro RS-330 Manual De Instrucciones página 3

AC Clamp Meter/English
Cautions
• Improper use of this meter can cause damage, shock, injury or death.
Read and understand this user manual before operating the meter.
• Always remove the test leads before replacing the battery.
• Inspect the condition of the test leads and the meter itself for any
damage before operating the meter. Repair or replace any damage
before use.
• Use great care when making measurements if the voltages are greater
than 30VAC rms or 60VDC. These voltages are considered a shock
hazard.
• Remove the battery if the meter is to be stored for long periods.
• Always discharge capacitors and remove power from the device under
test before performing Diode, Resistance or Continuity tests.
• Voltage checks on electrical outlets can be difficult and misleading
because of the uncertainty of connection to the recessed electrical
contacts. Other means should be used to ensure that the terminals are
not "live".
• If the equipment is used in a manner not specified by the manufacturer,
the protection provided by the equipment may be impaired.
Input Limits
Function
A AC
V DC, V AC
Resistance, Diode, Continu
2
Maximum Input
400A
600V DC/AC
ity Test
250V DC/AC
Meter description
1. Current clamp
2. Clamp trigger
3. Rotary Function swith
4. LCD display
5. MAX Hold button
6. Data Hold button
7. Mode select button
8. Range select button
9. Backlight button
10. COM input jack
11. V jack
12. Battery Cover
AC DC
1.
AC (alternating current) and DC (direct currrent)
2.
Minus sign
3. 1.8.8.8
2000 count (0 to 1999) measurement reading
4. AUTO
AutoRange mode
MAX
5.
MAX Hold mode
6.
Diode test mode
7. •)))
Audible Continuity
HOLD
8.
Data Hold mode
9. BAT
Low Battery icon
10. ℃,℉ ,m,V,A,K,M, Ω
Units of measure list
AC Clamp Meter/English
3