Publicidad
Idiomas disponibles
Idiomas disponibles
3. If the back of your television has a 75-OHM/300-OHM
U-shaped slider, slide switch, or short round cable, put it in
the 300-OHM position as follows:
A. U-shaped slider: Move the switch to the right until it
contacts both screws.
(Od
B. Slide switch: Slide to 300 OHMs.
© wl ®
C. Short round cable: Connect the cable to the 300-OHM
connector next to it.
4. Plug the game cable from the back of your Video Com-
puter System into the jack marked GAME on your switch box.
5. Peel the protective paper off the adhesive backing
on the
switch box, and press the switch box onto the back of your
television. The surface must be clean and dry.
6. Make sure the switch box is set to GAME for game play
and to TV for television viewing.
Publicidad
