Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
11. When finished listening, press POWER button on the tower speaker or
Remote Control to power Off (Standby mode) the Speaker.
LINE IN
1. Connect the Headphone/Earphone; Line out jack from the external audio
player such like MP3 player; Discman ... etc) to the LINE IN jacks on the rear
of tower speaker by the supplied Line In connection cable as the figure
below:
2. Connect the tower speaker to the power as previous procedures. The
Standby indicator will turn on.
3. Press the POWER button on the tower speaker or Remote Control to
power on the tower speaker.
4. Press the SOURCE button on the unit repeatedly to turn to LINE mode.
5. Power on the connected external player and start playback as usual.
6. Other operations are same as AUX IN mode.
USB
1. Insert the USB device to the USB port on the rear of tower speaker.
2. Connect the tower speaker to the power as previous procedures. The
Standby indicator will turn on.
3. Press the POWER button on the tower speaker or Remote Control to
power on the tower speaker.
4. Press the SOURCE button on the unit repeatedly to turn to USB mode.
5. Power on the connected external player and start playback as usual.
6. Other operations are same as AUX IN mode.
BLUETOOTH
Initial pairing:
1. Switch on the tower speaker. Press the SOURCE button and select
Bluetooth mode.
2. LED display Bluetooth icon "BT" will blink non-stop in searching for
device.
3. When a device is found, it will show the name "BTW-40K" If the device
require a password, enter "0000" to pair with the tower speaker.
Publicidad
Tabla de contenido
