Description Of The Appliance And Accessories - HAEGER Cake Boss 1500 Instrucciones De Uso

English
D
ESCRIPTION OF THE APPLIANCE AND ACCESSORIES
1. Stainless Steel bowl
3. Tilt-out head
5. Speed control knob
7. Whisk
A
SSEMBLING AND
The standard parts of this machine are composed of dough hook, whisk, beater
and stainless-steel bowl.
Before assembling the mixer, be sure the power cord is unplugged from the
−
power outlet and the speed selector is in the 0 position.
Before the appliance is used for the first time, all attachments and accessory
−
parts must be cleaned.
Place the food mixer on a flat stable surface and ensure a minimum of 10
−
cm. free space around the device. This device is not suitable for installation
in a cabinet or for outside use.
Do not insert the mains plug of the machine into the power socket without
−
having installed all the necessary accessories.
Inserting the bowl, attaching the cover and accessories
1. Slide the lock to release the multi-function head and then fully move it up.
Locking of the multi-function head in the top open position is indicated by
the lock returning to the default position, which is accompanied by an
audible click.
2. Insert the stainless-steel bowl into the base unit and secure it in place by
turning it clockwise. When the bowl is properly attached, it cannot be
separately lifted out of the base unit.
3. Insert the bowl cover into the notches on the upper end of the drive shaft
and turn it clockwise until it is not moving. The cover is used for covering the
bowl for short term storage of processed ingredients.
4. To attach an accessory, place it on the drive shaft and push it up slightly
and turn it clockwise until it cannot be moved. Gently pull the attachment
down to check that it is properly seated.
5. Place the ingredients that you wish to process into the bowl. Release the
lock and tilt the multi-function head to a horizontal position. After tilting
down the multifunction head, release the lock. The locked status of the
multi-function head in the tilted down work position is indicated by the lock
returning to the default position. This is accompanied by an audible click.
4
D
ISASSEMBLING
2. Bowl cover with a hole
4. Head release lock
6. Beater
8. Dough hook
Instructions for use